Télécharger Imprimer la page

De Dietrich DKD 1145 S Mode D'emploi page 34

Publicité

EN
BEFORE CALLING SERVICE
32
HC
LOPO
If your fridge is not operating;
• Is there any electrical fault?
• Is the plug is placed properly in the socket outlet?
• Is the fuse of the socket outlet that the plug is plugged or the main
fuse blown?
• Is the temperature setting is on correct level?
• Is there any fault in the socket outlet? Examine this by plugging your
fridge into a socket outlet which you are sure that is working.
If your fridge is not cooling enough;
• Is the temperature setting is on correct level?
• Is the door of your fridge opened frequently and left open for a long
while?
• Is the door of fridge closed properly?
• Did you put a dish or food on your fridge so that it contacts the rear
wall of your fridge so as to prevent the air circulation?
• Is your fridge filled excessively?
• Is there adequate distance between your fridge and the rear and side
walls?
• Is the ambient temperature between the values specified in the
operating manual?
If the food in your refrigerator compartment is over cooled
• Is the temperature adjustment right? (Is the refrigerator temperature
setting level is SC?)
• Are there many food recently put inside the freezer compartment?
If so, your fridge may over cool the food inside the refrigerator
compartment as it will operate longer to cool these food.
The foods starts
Refrigerator
to freeze because
comp. too
of the too much
Cold
cold temperature
When the power
supply gets lower
Low voltage
Warning
appliance gets to
steady position.
than 170 V the
1. Check if the "Super
cooling mode" is on
2. Decrease the
refrigerator temperature
values
This not a failure. This
prevents any damages
on the compressor. This
warning will off after the
voltage gets required
level

Publicité

loading