Publicité
Intended Use
The power tool is intended for dry sanding of wood, plastic,
filler and coated surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Dust box assembly
a)
(3) Rechargeable battery
(4) Battery release button
(5) Battery charge indicator
(6) Button for rechargeable battery charge indicator
(7) Edge protection
(8) Sanding pad
(9) LED for orbital stroke rate selection
(10) Button for reducing the orbital stroke rate
(11) Button for increasing the orbital stroke rate
(12) Handle (insulated gripping surface)
a)
(13) Sanding sheet
(14) Screw for sanding pad
(15) Sanding pad holder
(16) Pad brake/rubber sleeve
(17) Extraction outlet
a) This accessory is not part of the standard scope of delivery.
Technical Data
Random orbit sander
Article number
Rated voltage
Orbital stroke rate
preselection
A)
No-load speed n
0
No-load orbital stroke
A)
rate
Orbit diameter
Sanding pad diameter
B)
Weight
Recommended ambient
temperature during char-
ging
Permitted ambient temper-
C)
ature during operation
and during storage
Compatible rechargeable
batteries
Recommended re-
chargeable batteries
Bosch Power Tools
Random orbit sander
Recommended battery
chargers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
B) Depending on battery in use
C) Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and
environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted sound pressure level of the power
tool is 77 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
determined according to EN 62841-2-4:
a
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
GEX 18V-150-3
ing period.
3 601 C72 901
To estimate vibration and noise emissions accurately, the
V
18
times when the tool is switched off or when it is running but
●
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
–1
min
5000–10000
Implement additional safety measures to protect the oper-
–1
min
10,000–20,000
ator from the effects of vibration, such as servicing the
power tool and accessories, keeping their hands warm, and
mm
3
organising workflows correctly.
mm
150
Rechargeable battery
kg
1.7–2.7
°C
0 to +35
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
°C
–15 to +20
aging.
Charging the battery
GBA 18V...
u
ProCORE18V...
ProCORE18V
Note: Lithium-ion rechargeable batteries are supplied par-
4.0Ah
tially charged according to international transport regula-
4.0Ah
(triax vector sum) and uncertainty K
h
2
2
< 2.5 m/s
, K = 1.5 m/s
,
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
1 609 92A 9LB | (20.08.2024)
English | 15
GEX 18V-150-3
GAL 18...
GAX 18...
GAL 36...
Publicité
