Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Blade replacement
• Always be sure that the tool is
battery cartridge is removed
before carrying out any
Risk of injury to fingers and
hands when work on the knife.
Wear protective gloves.
The slides are exposed to heavy wear. Immediately
replace the blades when their correct operation is
not guaranteed.
The blade can be changed rapidly and expediently
without any tools.
1,To change the blade, you must remove the
Blade cover (A) at first. Follow the steps as shown
in the upper figure.
① Hold the machine in one hand as showed in the
upper figure. Lever the retainer (B) upwards
with your thumb and forefinger of another hand.
② Hold the blade cover firmly and pull it
backwards.
③ Remove the blade cover upwards.
2,Take off the blades and install another blades.
CAUTION:
switched off and the
work on the tool.
CLEANING/STORAGE
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all debris, especially from the
ventilation slots.
Store the machine in a secure dry place out of reach
of children. Do not place other objects on top of the
machine.
Battery storage
_ Store your batteries in a cool area. Optimal
temperature for storing your Li-ion
battery for longer term is 2° C. (capacity loss wil l
only be 6% / year (compared to
20% at 25° C)). Never store batteries in discharged
condition.
_ It is better for Li-ion batteries to recharge them
frequently. Optimal long time
storage charge for your Li-ion battery is at 40% of
their capacity.

SERVICE DEPARTMENT

_ Damaged switches must be replaced by our after-
sales service department.
_ If replacing the power cord is necessary, it
should be done by the manufacturer or his agent
to avoid a hazard.
41

Publicité

Table des Matières
loading

Table des Matières