Gardeo GKIT10.8VLIT-3IN1T Traduction Des Instructions D'origine page 38

The starting lockout and ON button on the tools
no longer function when the swivel handle is
mounted.
Removing the telescopic swivel handle
assembly (2):
Press the release button (3) and pull out the swivel
handle assembly (2).
STARTING UP
Switch action
• Before inserting the battery
always check to see that the
properly and returns to the
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided.
To start the tool, depress the lock-off button and pull
the switch trigger. Release the switch trigger to stop.
The lock-off button can be pressed from either right
or left side.
Cutting with swivel handle:
The telescopic handle is fully height adjustable and
can be adapted to suit your height.
• Before inserting the battery
always check to see that the
properly and returns to the
1. Attach the swivel handle.
2. Open the lock button (3), hand holding the tube
(5) the other hand holding the handle (4) pull up
3.pole pulled after the appropriate length, press the
lock button (3), lock the tube intact.
4. Push lock-off button (1) forward and press switch
(2).
CAUTION:
cartridge into the tool,
switch trigger actuates
"OFF" position when
released.
CAUTION:
cartridge into the tool,
switch trigger actuates
"OFF" position when
released.
Swivel head:
• Always be sure that the tool
battery cartridge is removed
• Before inserting the battery
always check to see that the
properly and returns to the
Hold the handle 2 tightly。Slide the lock button 1 up
and then turn the cutter head 3 to the desired
position.Release the lock button 1 again and check
whether the cutter head is locked in place.
Note:The cutter head can be locked in five
positions(-54° -36° 、-18°、0°、18°、36°、54° ) 。
CAUTION:
is switched off and the
before carrying out any
work on the tool.
CAUTION:
cartridge into the tool,
switch trigger actuates
"OFF" position when
released.
38