Intended Use; For Your Safety - Gardeo GKIT10.8VLIT-3IN1T Traduction Des Instructions D'origine

Pictograms on charger
The following pictograms have been applied to the
charger:
"Class II - The machine is
double insulated; Earthing wire
is therefore not necessary
Only use the battery charger
Fail-safe isolating transformer.
- LI-ION BATTERY
Advantages of Li-ion batteries :
- Li-ion batteries have a higher capacity/weight ratio
(more power for less heavy, more
compact, battery)
- No memory effect (capacity loss after several
charge/discharge cycles) like other type
batteries. (Ni-Cd, Ni-MeH ..) .
- Limited self discharge.
Charge battery pack solely with
the charger provided !
Make sure that the power supply
is 230 Volts AC / 50Hz.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
ELECTRICAL SAFETY
Check whether the voltage
indicated on the type plate of the
charger corresponds to the mains
voltage.
indoors.
Cut-out switch.
suffocation!

INTENDED USE

This product is designed for easy cutting work on
lawn edges and shrubs in house and hobby gardens
only.
• The intended usage also includes compliance with
the operating, servicing and repair conditions
prescribed by the manufacturer and following the
safety instructions included in
the instructions.
• Any other use is deemed not to be intended use.
The manufacturer is not liable for any type of
damage resulting from this: the user bears the sole
risk.
• Unauthorized modifications to the machine
preclude any liability of the manufacturer for
resulting damages of any kind.
• The relevant accident prevention regulations for
the operation as well as the other generally
acknowledged occupational medicine and safety
rules must be complied with.
INTRODUCTION
This manual gives instructions on the correct
assembly and safe use of your grass shear/shrub
shear. It is important that you read these
instructions carefully.

FOR YOUR SAFETY

Warning! Switch off before adjusting or
cleaning.
The blades continue to move for a few
seconds after the Machine is switched off.
Caution! Do not touch the moving blades.
ASSEMBLY
• Always be sure that the tool
battery cartridge is removed
Fitting the wheels assembly (1):
Push the wheels assembly (1) upward into the grass
shear until both catches click into suitable place.
Removing the wheels assembly (1):
Pull the wheels assembly (1) downwards and
remove.
Fitting/removing the telescopic swivel handle (2)
Fitting the telescopic swivel handle assembly
(2):
Guide the swivel handle assembly (2) at the desired
angle between 0° and 360° into the handle holder of
the wheels assembly (1) until the lock engages.
CAUTION:
is switched off and the
before carrying out any
work on the tool.
37