Publicité
Troubleshooting Guide
The following check will assist in the correction of most problems
which you may encounter with your unit.
Before going through the check list below, refer back to the
connection and operating procedures.
Radio reception
Trouble
Cause/Solution
Preset tuning is not possible.
• Memorize the correct frequency.
• The broadcast is weak.
Automatic tuning is not possible.
The broadcast is weak. -* Use manual
tuning.
The **ST" indication flashes.
• Tune in precisely.
• The broadcast is weak. -> Press the SENS
button to enter the MONO mode.
Disc play
Playback sound is skipped.
Dusty or defective disc.
General
i
•—
No sound
• Control the volume with the CO button.
• Set the fader control to the center position on
the 2-speaker system.
Indications do not appear on the display
Detach the front panel and clean the
window.
connectors. See "Cleaning the Connectors"
of "Maintenance" for details.
50
Publicité
