Displaying the Name of Each Station
DSPL
B
E 11
Tv/roeo 1
s
mi
5A
SB
5
To register the name, use one of the following two
methods.
A Press the LIST button for more than two seconds.
The unit will go back to the normal mode.
B Hine in another station by pressing the SEEK or
PRESET button and repeat the procedures.
EjslSjj
Sj58^3|
<J^|
or
You can also change the band and repeat the process.
Notes
* If you turn off the tuner
before you complete this
procedure, the name you
have just entered will not be
registered.
• You can store up to 62
names, but if you try to enter
more, the "FULL" indication
will come on the display
window and you will not be
able to register them. Ybu
can register more names
after erasing some of the
existing names.
Displaying the Stations Names
While listening to the radio, press the DSPL button to enter
the name display mode.
DSPL
__
ht1! 22CUBPL V
If the name of the station is not registered, "•-" will come on
the display window.
Each time you press the
DSPL button while listening
to the radio
The display mode changes
cyclically as follows:
~1
Station name display
mode
Frequency display
mode
*
Clock display mode
20