Philips 3000 Serie Mode D'emploi page 10

English
12
2 Tip: Test on an invisible spot first to check how the detergent reacts with the
surface.
3 Hold the nozzle approximately 5 cm above the surface you want to clean.
Press the spray button to apply cleaning solution to the surface.
4 Release the spray button to stop the water flow.
Tip: Cleaning effectiveness on heavily stained or highly soiled areas will be
enhanced if you wait 3-5 minutes before you start cleaning (step 5)
5 Gently scrub the area to be cleaned. Apply downward pressure the nozzle
and pull it toward you. The suction will remove the dirt and detergent-added
water.For extra thorough cleaning repeat cleaning procedure.