Shipment And Packaging - Abicor Binzel ABIPLAS WELD 100W Mode D'emploi

6. Safety
warnings
(continuation)
7. Shipment and
packaging
• Use curtains or partitions to protect those not involved in the
welding process from radiation and the danger of arc flashing.
• When handling gas cylinders, consult the instructions from the
manufacturers and suppliers of pressurised gas.
• Work pieces, which have been degreased using chlorinated
solvents, must be thoroughly cleaned before welding starts, to
avoid the risk of phosgene forming.
For the same reason, no degreasing baths containing chlorine
must be placed in the vicinity of the welding area.
• All metal baths, especially lead, cadmium, copper, zinc and
beryllium are harmful!
Use ventilation or an extraction system to ensure that specified
MAC values are not exceeded.
• Place appropriate fire extinguishing equipment in the workplace,
within easy reach.
• The welding torch may only be used in suitable premises.
The components are carefully checked and packaged however damage may
occur during shipping.
Checking procedure on receipt of goods
– Check that the shipment is correct by referring to the shipping note.
In case of damage
– Check the package and components for damage (visual inspection).
In case of complaints
If the package and/or components have been damaged during shipment:
– Get in contact with the last carrier immediately.
– Keep the packaging (for possible checks by the carrier or supplier or for
returning the goods)
Packaging for returning the goods
Use the original packaging and the original packaging material.
If you have questions concerning the packaging and safety during shipment,
please consult the supplier.
Storage in an enclosed space
Ambient temperature
for shipment and storage:
Relative humidity of the air:
- 25 °C to + 55 °C
up to 90 % at a temp. of 20 °C