Publicité
13. This appliance is not designed to be switched
EN
on using an external timer or separate remote
control systeḿ.
14. The oven is fitted with a power plug. If this
plug isn't accessible after installation for the
disconnection of the oven, it must be connected
to a switch which enables all-pole shut-off.
The switch should be connected directly to the
power terminals and must be distanced from
the contacts on all poles in order to ensure total
disconnection under the conditions for a type
III power surge.
15. If you have any doubts, seek professional
advice.
16. If the power cord is damaged, it must be
replaced by the manufacturer, the after-sales
service or similarly qualified people to prevent
any danger.
17. WARNING: To avoid any risk of damage to
the appliance, transport it in its position of use
with its transport blocks.
18. In the event of a breakdown, do not try to
repair the appliance yourself. Repairs made by
non-qualified individuals may cause damage.
Contact the after-sales service.
19. WARNING: When disposing of the
appliance, and to avoid any risk of bodily harm,
shut off anything which may present a danger:
Cut the power cable flush to the appliance, and
6
Publicité
