D – Important warnings for the installation:
EN
E – Connection to the electrical network
Safety is only guaranteed when the appliance is connected to an earthed socket which is
compliant with the applicable standards. The electrical installation must be able to handle
the power generated by the appliance.
If, after installation, the power plug is not accessible, a way of disconnecting the appliance
from the power supply with an opening distance of the contacts of all of the poles must be
anticipated in the fixed channelling, in compliance with the installation guidelines (this system
must not interrupt the earth wire). The appliance must be easily accessible.
Warning:
home's power supply corresponds to the voltage indicated on the appliance's information
panel. The technical data and electrical connection conditions are indicated on the appliance's
information panel.
Warning:
to the electrical connections overheating.
Position the power cable so that it isn't touching the external metal walls of the oven.
5. USE
Before using the oven for the first time
Make sure that there's no packaging material left in your appliance. These packaging elements
should be recycled separately (see paragraph: disposal.)
To eliminate any residue or grease that may have been left after production:
Open the door of the oven and leave it to heat to 240 °C for 30 minutes, then switch off the oven
and leave it to cool.
Warning:
Only use warm water and a small amount of cleaning product to wash the inside of the
oven.
Your appliance is designed from normal domestic use. Do not use it for commercial or industrial
purposes, or for any purpose for which it has not been designed.
When using the appliance, make sure that the kitchen is well-ventilated. Keep natural ventilation
openings clear, or install a mechanical ventilation device (i.e., a mechanical ventilation hood).
Intensive and prolonged use of the appliance may require additional ventilation, for example,
by opening a window, or more efficient ventilation, such as by increasing the power of the
mechanical ventilation, if there is any.
The integrated fan cools both the built-in unit and the front
of the appliance. It may continue to run for approximately
20 to 30 minutes, even when the oven is switched off.
- The rear of the slot which the oven is integrated into must be
open, so that there is sufficient ventilation
- If the oven is installed in a column configuration and there
is no opening in the upper section of the kitchen unit, cut an
opening measuring 560 mm in with and 40–50 mm in height
in the lower section of the unit.
Before plugging in your appliance, make sure that the voltage of your
Do not use extension cables, multi-socket strips or adapters, as this may lead
Ventilate the room during this process to evacuate any smoke.
12