Publicité
Operation Instructions
Note: Read the instruction manual before operation.
1
Install/remove battery pack
When installing or removing the battery pack, ensure that the tool is in the shutdown state;
When removing the battery pack, press the button above the battery pack while pulling it out of the tool;
When installing the battery pack, align the reed on the battery pack with the groove on the tool housing, and
then slide it into place. Insert it fully into place until the battery pack is locked and clicks. If it is not installed
properly, it may cause the battery pack to detach from the tool, leading to personal injury.
2
Install the auxiliary handle
Warning!
Before adjusting or checking the functionality of the tool, be sure to turn off the power and remove the
battery pack.
EN
9
Publicité
