Publicité
V1.0
8.
Do not disconnect from the power source in place of using the ON/OFF
switch on the tool. This can lead to an accidental startup when the tool
is connected to the power supply.
9.
Do not allow a rechargeable battery to fully discharge. This will
damage the battery. Recharge the battery as soon as possible.
10. Prevent a build-up of explosive gases by storing the battery in a
ventilated area or container that will disperse the small amounts of gas
created.
11.
Do not store the battery completely discharged. Charge it fully before
storing. Recharge occasionally if storing for a long time.
12. Set the tool' s trigger switch to the OFF position before installing or
removing the battery pack. This will help to prevent injuries due to
accidental starts.
13. Do not operate the tool with the battery cover or portions of the case
removed or loosened.
14. Ensure that the batteries are correctly placed in the battery case and
connected properly.
15. Check the battery power level before each use.
16. To facilitate cooling of the battery pack after use, avoid placing the
charger or battery pack in a warm environment such as in a metal
shed, or an uninsulated trailer.
KICKBACK PRECAUTIONS
Kickback is a sudden reaction to a pinched or snagged cutting accessory.
The tool kicks out and away from the workpiece while the cutting accessory
is still active. This can inflict a serious injury on the user or a bystander.
Kickback can also damage the tool or workpiece.
Kickback can be avoided by taking proper precautions:
1.
Maintain a firm grip on the tool and position your body and arms to
allow you to resist a kickback. Kickback will propel the tool in the
direction opposite to the cutting accessory' s teeth or direction of
rotation. A snagged rotary cutting bit may pull the tool out of the grasp
of the user.
2.
If kickback occurs:
a.
the cutting accessory may pass over a body part, causing a
serious injury;
Visit www.princessauto.com for more information
20V Cordless Brushless Dry Cut Metal Saw
9095738
7
Publicité
