Publicité
V1.0
INTRODUCTION
This reliable, stationary saw is ideal for cutting various ferrous and non-
ferrous metals. It features a 7-1/4 in. blade with full guard, a 45° angled
cutting capacity and a no-load speed of 3,400 RPM. It' s designed for use
with compatible Powerfist battery and charger (not included).
SAFETY
WARNING! Read and understand all instructions before using this tool.
The operator must follow basic precautions to reduce the risk of
personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection
and maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions. Place lights so you are not working in a shadow.
2.
Keep anyone not wearing the appropriate safety equipment a minimum
of 50 ft away from the work area.
3.
Store tools properly in a safe and dry location. Keep tools out of the
reach of children.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
5.
Do not expose the tool to damp or wet conditions, and do not operate in
inclement weather such as heavy rain, strong winds, or extreme cold.
6.
Operate on flat, stable surfaces capable of carrying the capacity of the
tool and the workpiece.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply with
CSA Z94.3-07 or ANSI Z87.1 standards based on the type of work
performed.
2.
Wear the appropriate type of full-face shield in addition to safety
googles, as the work can create chips, abrasive or particulate matter.
Visit www.princessauto.com for more information
20V Cordless Brushless Dry Cut Metal Saw
9095738
3
Publicité
