Publicité
V1.0
DANGER! When the tool is in operation, keep hands away from the saw
blade and the area it is being applied to. Failure to follow this warning
will result in amputation, serious personal injury or death.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
Do not use the tool if any parts are damaged, broken or misplaced.
Repair or replace the parts.
3.
Only use accessories that are specifically designed for use with the
tool. Ensure the accessory is tightly installed.
4.
Do not use a dull or damaged cutting accessory. A dull cutting
accessory requires more force to use the tool, possibly causing the
accessory to break. This may cause an injury and will damage
the workpiece.
a.
Dull or improperly set cutting accessories produce a narrow kerf
that can cause excessive friction on the cutting accessory,
resulting in binding or a kickback. Keep the cutting accessory' s
edge sharp and clean.
5.
Only use a cutting accessory that exceeds the No Load Speed rating
(see Specifications).
6.
Always wait until the tool has reached full speed before beginning
any operation.
7.
Never install more than one cutting accessory at a time unless the tool
and cutting accessories are designed for that purpose.
a.
Only use a cutting wheel with the correct arbor size and shape
that matches the tool' s spindle.
b.
Use only bonded reinforced or diamond cutting blades with
this tool.
8.
Inspect material for foreign objects such as staples, nails or debris.
Remove from material before cutting.
9.
Always handle the blade with care when mounting or removing it.
10. Never reach behind or beneath the blade.
11.
Remove any adjusting keys or wrenches before turning the tool on.
Visit www.princessauto.com for more information
20V Cordless Brushless Dry Cut Metal Saw
9095738
5
Publicité
