Publicité
V1.0
8.
Insert the battery pack (N) into the battery
port (M). Make sure the release latch snaps into
place, securing the battery properly (Fig. 4).
9.
Depress the safety lever (Fig. 5-1) on the top
handle (#24) and then depress the trigger (L) to
start the tool (Fig. 5).
10. Allow the motor to re ach full speed and then
slowly lower the blade onto the workpiece.
11.
For efficient cutting, make sure the centre line of
the blade hub is in line with, or behind, the
centerline of the workpiece toward the rear of
the tool.
12. Once the cut is complete, raise the blade
completely from the workpiece before releasing
the trigger and stopping the tool.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good
condition is efficient, easier to control and will
have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Follow instructions for lubricating and changing accessories.
4.
Only use accessories intended for use with this tool.
5.
Keep the tool clean, dry and free from oil/grease at all times.
6.
Keep the tool' s air vents unclogged and clean at all times.
7.
Remove any metal or other debris that collects around the guard and
spark deflector.
8.
Regularly ensure that all fasteners are tight.
9.
Maintain the tool' s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
Visit www.princessauto.com for more information
20V Cordless Brushless Dry Cut Metal Saw
9095738
Fig. 4
Fig. 5
11
Publicité
