Blendtec Commercial Serie Manuel Du Propriétaire page 6

SECTION 3
GETTING TO KNOW YOUR BLENDER
Jar
Multicolor
LED Indicator
User
Interface
Power Switch
Power Cord
6
3.1 BLENDER MOTOR BASE
• Power Switch: Located on the back of the blender in the
Lid
exhaust vent cavity, this switch turns the blender on or off
when plugged in.
• User Interface: This simple and easy-to-use user interface
has a 3-position switch, and a 180° knob for speed control.
Blade Assembly
The switch has 3 modes: BLEND (up), STANDBY (neutral), and
PULSE (down). The knob provides precise and responsive
speed control. RPM range: 1,550 – 25,000.
• Multicolor LED Indicator: This light indicator signals that the
blender is powered on and gives the user information about
Hardened Metal
Drive Socket
the status of the blender. When in diagnostic mode, it is also
used to display cycle counts (like the odometer in a car), error
states, and error counts.
• Hardened Metal Drive Socket: This is where the jar couples
with the motor to turn the blade.
• Motor Base Cover: Houses the power unit in a durable, plastic
Motor Base
material.
Cover
• Power Cord: The power cord is located at the back of the
motor base cover.
• Circuit Breaker: The circuit breaker protects your blender by
automatically cutting off power to prevent electrical overload
or short circuits. Push to reset the circuit breaker.
3.2 BLENDER JAR ASSEMBLY
The blender jar assembly consists of the blender jar, blade
assembly, and lid. These components are integrated to help
create consistently blended recipes and greater operator safety.
• Lid: The lid seals liquids within the jar during blending.
Some models have a vent that provides pressure relief when
Circuit
Breaker
blending hot foods.
• Jar: Your jar is durable, BPA-free, and easy to clean.
• Blade Assembly: The uniquely designed stainless steel blade