Publicité
8.2 Exchanging the visor
First unscrew the (hexagon socket) screws on both sides.
Then pull the visor out of its mounting.
First mount the new visor and then the helmet liner support onto the protruding
side joints and reinsert and tighten the screws (Caution: Ensure the proper seating
of the included spring lock washers!)
8.3 Replacing the eye shield
First unscrew the three main screws (hexagon socket) on the left, right and at
the rear.
Then pull the gear box shaft out of the adjustment knob. Remove the complete
helmet liner from the helmet. Afterwards remove the two screws (hexagon socket)
of the eye shield mount and exchange the eye shield.
Reinstall the complete helmet liner in the reverse order.
8.4 Exchanging the helmet liner, including the cradle net
Remove the 3 main screws as described under point 8.3, pull the shaft out of the
adjustment knob and remove the complete helmet liner. Reinstall in the reverse
order.
HEROS Smart – Rosenbauer
EN
35
Publicité
