Publicité
Rosenbauer – HEROS Smart
of the helmet can be used to infinitely adjust the size from 51 to 65. If the hat size
is smaller, the basic width of the headband can also be adjusted. Open the helmet
band, put on the helmet, tighten the helmet band until there is a snug fit without
any uncomfortable pressure.
Putting on the helmet
CAUTION: Do not forcibly continue to turn the knob when the stop has been reached.
Of course the helmet can be adjusted as needed to adapt to the given conditions during
an operation - under observance of all safety regulations.
4.2 Adjusting the height:
The height is adjustable
in ten positions by means
of 2 ratchet adjusters
located on the headband
on the left and right
rear side of the helmet
liner. The helmet should
be adjusted so that the
eyes are aligned with the
vertical center of the visor.
The distance of the nose to the visor can also be
adjusted by means of the ratchet adjusters. Moving
the ratchet adjusters inwards towards the helmet
shell results in more space between the nose and
the visor and vice versa.
For easier accessibility set the helmet band to "minimum" before adjusting the
ratchet adjusters.
CAUTION: When adjusting the ratchet adjusters it is important to listen for the audible
snapping of the adjuster into position on both sides after the adjustment in order to
ensure a proper safety function of the helmet liner.
28
Size regulator to be turned on to „minimum"
Eye level in the vertical center of the visor - adjusted correctly
1/2
1/2
Publicité
