Publicité
Rosenbauer – HEROS Smart
the desired position. This adjustment must be made on both sides.
Afterwards the headband must be reinstalled into
the helmet. Make sure that the helmet liner has been
installed properly and completely. This is the only way
that the protective function of the helmet is ensured.
Special attention must be paid that the headband is
installed so that the
on the gear cover can be
read correctly when the helmet is put on.
4.4 Adjusting the chin strap
The chin strap can be fastened and unfastened by means of the plastic buckle.
The chin strap can be tightened or loosened by sliding the continuously adjustable
buckle on the right side of the chin strap.
In order to enable an
optimal fit of the chin
strap, the position
of the strap can be
adapted by adjusting
the Velcro fastener in
the neck area.
The chin strap can be
optimally adapted to the
shape of the head by means
of the horizontal strap with
the Velcro fastener. If the
contact in the neck area is
supposed to be especially
tight, the transverse strap
can be pulled through the eyelet and attached on the back with Velcro.
When using a chin cup adjust the length of the chin strap so that the chin cup fits well.
30
Publicité
