Publicité
Rosenbauer – HEROS Smart
This type of damage may not be evident right away. Every helmet that was subjected to
such severe strain must be replaced immediately!
WARNING: If an additional piece of personal protection equipment or an accessory is
added (with the exception of accessories delivered with this helmet by the manufacturer),
a helmet which is labeled to be in accordance with EN 443 may not be in conformance
with all sections of this standard anymore. Reference must be made to the corresponding
information, which must be supplied by the helmet manufacturer.
WARNING: The fire fighting helmet can only offer maximum protection if it has been
properly adjusted and provides a perfect fit on the head. The helmet may only be worn
in its entirety. Removable parts may not be used singly.
2. Technical description
2.1 General
Manufacturer:
Rosenbauer International AG
Paschinger Strasse 90
4060 Leonding / Austria
Tel.: +43 732 6794-0
rbi@rosenbauer.com
www.rosenbauer.com
These instructions apply to the various models of the HEROS Smart, article nos. 1570XX
and 1571XX. The HEROS Smart fire fighting helmet was designed and tested in
accordance with European standard EN 443:2008.
Download EC declaration of conformity:
https://www.rosenbauer.com/en/rosenbauer-world/download-center
2.2 HEROS Smart specifications
Tested according to the standard EN 443:2008 C 0299
Helmet type A / 3b
Head sizes: 51-65 cm (adjustable)
E 2 (optional requirement 4.12.2. – insulation of wet helmet – fulfilled)
E 3 (optional requirement 4.12.3. – surface insulation – fulfilled)
C (optional requirement 4.13. – contact with chemicals – fulfilled)
*** (optional requirement – minus 30°C – fulfilled)
Weight of helmet (with visor, without neck protection): approx. 1230 g.
24
Publicité
