Publicité
4.3- Installation
Selecting suitable site
• The light works best at the height of 1,8 – 2,0 metres above the ground level.
• It is important that the installation location is away from shady areas, such as under trees.
• The motion sensor must face the direction in which the motion is to be detected.
• Ensure there is no other light sources which could interfere with the sensors.
Wall mounting
• Remove the light head from the anchor (4), see Fig. 2a).
• Securely install the anchor on the wall with the screws and plastic wall plugs provided, see
Fig. 2b).
• Restore the light head into the anchor, see Fig. 2c).
• Adjust the light head angle at the hinge (6), see Fig. 2d).
a)
c)
Installing on lamp post
• Remove the light head from the anchor (4), see Fig. 3a).
• Set the light head base and the anchor around the lamp post, as illustrated in Fig 3b).
• Securely mount the light on the lamp post with the round U-bolts and the wing nuts
provided, refer to Fig 3c) and 3d) for details.
• Adjust the light head angle at the hinge (6), see Fig. 3e).
• Make sure the lamp post is stable.
b)
d)
Fig. 2
Page 10 / 18
Publicité
