Télécharger Imprimer la page

Beurer BM 27+ Mode D'emploi page 33

Publicité

7. CLEANING AND MAINTENANCE
• Clean the device and cu carefully using only a slightly damp
cloth.
• Do not use any cleaning solutions or solvents.
• Under no circumstances hold the device or cu under water,
as this can cause liquid to enter and damage the device and
cu .
• If you store the device and cu , do not place heavy objects on
the device and cu . The cu line should not be bent sharply.
• Remove the batteries if the device is not going to be used for
a long period of time.
8. ACCESSORIES AND/OR
REPLACEMENT PARTS
Accessories and/or replacement parts are available at www.
beurer.de, under "Service". Please state the corresponding order
number.
Designation
Universal cu (22-42 cm)
Mains part (EU)
Mains part (UK)
Item number and/or
order number
110.031
072.78
072.79
9. TROUBLESHOOTING
In the event of errors, the error message _ appears on the dis-
play. Error messages may appear if:
• It was not possible to correctly record the pulse:
• The measured blood pressure is outside the measurement
range:
;
• The cu is fastened too tightly or loosely:
• Errors occur during the measurement:
• The inflation pressure is higher than 300 mmHg:
• There is a system error. If this error message appears, please
contact Customer Services:
• The batteries are almost empty:
In such cases, repeat the measurement. Ensure that the cu line
is correctly attached and that you do not move or speak during
the measurement.
If necessary, reinsert or replace the batteries.
10. DISPOSAL
Repairing and disposing of the device
• Do not repair or modify the device yourself. Proper operation
can no longer be guaranteed in this case.
• Do not open the device except for the battery compartment.
Failure to comply will invalidate the warranty.
33
;
;
;
;
;
.

Publicité

loading