Publicité
Les langues disponibles
Les langues disponibles
Switching on and off
• Check connecting line and plug on damages first.
• Push the button MAGNET ON so that the magnet adheres and the grip of the drill stand is ensured.
When drilling in a material thickness less than 6 mm, a steel plate of appropriate thickness has
to be placed underneath the workpiece to ensure the full magnetic adhesive force of the magnet
foot.
• For non-magnetisable materials use the Rotabest Vacubest (Prod.-No. 18150).
• When working on walls and ceilings secure the machine with the safety belt.
At this work we recommend cooling the tool with a spray. For example Alfra BIO 4000, prod. No. 21040.
• Push the green button to start the motor.
• To switch off the machine proceed in reverse order, MOTOR OFF and then MAGNET OFF.
First push red button on the left
How to work with core drills
• Push ejector pin (center pin) through head of the annular cutter.
Only use injector pins, prod. No. 1924500, 6.35 x 70 mm.
• Core drills with Weldon shank are tightened with clamping screws (DIN 913) on both clamping surfaces.
then push red button on the right
11
Publicité
