Publicité
TECHNICAL DATA
Type
Production code
Voltage battery
Rating input current
No-load speed
Air speed
Air fl ow rate
Weight according EPTA-Procedure 01/2014 (2.0 Ah ... 12.0 Ah)
Recommended ambient operating temperature
Recommended battery types
Recommended charger
Noise information: Measured values determined according
to EN 50636-2-100 Annex CC.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Always wear ear protectors!
Vibration information: Total vibration values (vector sum in the
three axes) determined according to EN 50636-2-100 Annex BB.
Vibration emission value a
/ Uncertainty K
h
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized
test given in EN 50636-2-100 Annex BB and may be used to compare one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for
diff erent applications, with diff erent accessories or poorly maintained, the vibration and noise emission may diff er. This may
signifi cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from the eff ects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm, organization of work patterns.
WARNING Read these instructions carefully, be
familiar with the controls and the proper use of the
machine. Save all warnings and instructions for future
reference.
CORDLESS BLOWER SAFETY WARNINGS
Training
Read the instructions carefully. Be familiar with the controls
and the correct use of the machine.
Keep in mind, that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
Preparation
Obtain ear protection and safety glasses. Wear them at all
times while operating the machine.
While operating the machine always wear substantial
footwear and long trousers. Do not operate the machine
when barefoot or wearing open sandals. Avoid wearing
clothing that is loose fi tting or that has hanging cords or ties.
Do not wear loose clothing or jewellery that can be drawn into
the air inlet. Keep long hair away from the air inlets.
Operate the machine in a recommended position and only on
a fi rm, level surface.
Do not operate the machine on a paved or gravel surface
where ejected material could cause injury.
16
M18 FBLG3
Cordless Garden Blower
5033 22 01 XXXXXX MJJJJ
18 V
32 A
0-21000 min
-1
0-193 km/h
0-14,2 m
3
/min
2,9 kg ... 4,0 kg
-18...+50 °C
M18B...; M18HB...
M12-18...; M1418C6
83,6 dB(A) / 3 dB(A)
92,6 dB(A) / 3 dB(A)
0,36 m/s
2
/ 1,5 m/s
2
Operation
Never operate the machine while people, especially children,
or pets are nearby.
Always stand clear of the discharge zone when operating this
machine.
If the machine becomes clogged, remove the battery before
cleaning debris.
Never operate the machine with defective guards or shields,
or without safety devices, for example debris collector in
place.
Stop the machine, and remove the battery from the tool.
Make sure that all moving parts have come to a complete
stop
- whenever you leave the machine,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine.
The blower shall not be used for sucking!
Do not blow hot, fl ammable or explosive material.
Use the machine only in daylight or good artifi cial light.
Always be sure of your footing on slopes.
Never blow in the direction of bystanders. Do not operate
without tubes in place.
Walk, never run.
Keep all cooling air inlets clear of dirt.
Pay attention that bystanders are not injured through foreign
objects thrown from the machine.
ENGLISH
Do not use for sucking liquids!
Do not overreach and keep your balance at all times.
Do not use in the rain or leave outdoors while it is raining.
If the product is dropped, suff ers heavy impact, or begins to
vibrate abnormally, immediately stop the product and inspect
for damage or identify the cause of the vibration. Any damage
should be properly repaired or replaced by an authorised
service centre.
Maintenance and storage
When the machine is stopped for servicing, inspection, or
storage, or to change an accessory, remove the battery and
make sure that all moving parts are come to a complete stop.
Allow the machine to cool before making any inspections,
adjustments, etc. Maintain the machine with care and keep
it clean.
Store the machine in a dry place out of the reach of children.
Always allow the machine to cool before storing.
Do not modify this blower. Unauthorized modifi cations may
impair the safety of your product and may result in increased
noise and vibration.
Keep all nuts, bolts and screws tight to be sure that the
machine is in safe working condition.
Examine the machine and replace worn or damaged parts
for safety.
Replace worn or damaged parts for safety. Use only genuine
replacement parts and accessorises.
Never attempt to override the interlocked feature of the guard.
ADDITIONAL SAFETY INSTRUCTIONS
Never allow children, persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge or
people unfamiliar with these instructions to use the machine,
local regulations may restrict the age of the operator.
Children being supervised not to play with the appliance.
Remove the battery pack before starting any work on the
machine.
Do not dispose of used battery packs in the household refuse
or by burning them. Milwaukee Distributors off er to retrieve
old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only System M18 chargers for charging System M18
battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme
load or extreme temperatures. In case of contact with battery
acid wash it off immediately with soap and water. In case
of eye contact rinse thoroughly for at least 10 minutes and
immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or allow a fl uid to fl ow
inside them. Corrosive or conductive fl uids, such as seawater,
certain industrial chemicals, and bleach or bleach containing
products, etc., can cause a short circuit.
RESIDUAL RISK
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
• Injury caused by vibration
Hold the product by designated handles and restrict
working time and exposure.
• Exposure to noise can cause hearing injury
Wear ear protection and limit exposure.
• Injury due to fl ying debris
Wear eye protection, heavy long trousers, gloves and
substancial footwear at all times.
SPECIFIED CONDITIONS OF USE
The cordless blower is intended for blowing of dirt and leaves.
Do not use this product in any other way as stated for normal
use.
NOTES FOR LI-ION BATTERIES
Use of Li-Ion batteries
Batteries which have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery. Avoid extended exposure to heat
or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, the batteries have to be fully
charged, after used.
To obtain the longest possible battery life remove the battery
pack from the charger once it is fully charged.
For battery storage longer than 30 days:
Store the battery where the temperature is below 27°C and
away from moisture
Store the battery in a 30% - 50% charged condition
Every six months of storage, charge the battery as normal.
Battery protection for Li-Ion batteries
In extremely high torque, binding, stalling and short circuit
situations that cause high current draw, the tool will vibrate for
about 5 seconds, the fuel gauge will fl ash,and then the tool
will turn OFF. To reset, release the trigger.
Under extreme circumstances, the internal temperatur of the
battery could become to high. If this happens, the fuel gauge
will fl ash and the battery pack cool and then continue work.
Transport of Li-Ion batteries
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in
accordance with local, national and international provisions
and regulations.
• The user can transport the batteries by road without further
requirements.
• Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations.
Transport preparation and transport are exclusively to
be carried out by appropriately trained persons and the
process has to be accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that battery pack is secured against movement
within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
CLEANING
The ventilation slots of the machine must be kept clear at all
times.
MAINTENANCE
Keep all nuts, bolts and screws tight to be sure that the
machine is in safe working condition.
ENGLISH
17
Publicité
