Appendix; Using.the.remote.control; Updating.the.software.and.map; Clearing.all.user.data - Kenwood KNA-G510 Mode D'emploi

a
PPendiX
a
ppendiX
Using the Remote Control
You can use a standard Kenwood system remote control
with the navigation system.
Updating the Software and Map Data
To update the navigation system software, you must
have an SD card, an SD card reader, and an Internet
connection.
To update the navigation software:
1.. Go.to.http://www.garmin.com/support/download.jsp..
Select.Updates and Downloads..
2.. Click.Download.next.to.the.navigation.system.software..
EN-
3.. Read.and.agree.to.the.terms..Click.Download..
4.. Select.Save..Then.save.the.update.onto.an.SD.card.
5.. Insert.the.SD.card.into.the.side.of.the.KNA-G510..Your.
software.is.updated.automatically.
You can purchase map data updates from Garmin. Check
http://www.garmin.com/unlock/update.jsp
update for your map software is available.
Clearing All User Data
You can clear all user data, including all favorite places,
routes, custom POIs, tracks, mileage logs, and your
home location, at one time.
CAUtIoN: You cannot recover your user data
once it is deleted.
1.. Touch.Tools.>.My Data.>.Clear
2.. Touch.Yes..The.navigation.system.restarts.
to see if an
All.
KNA-G510 Instruction Manual