Publicité
24
1
2
1
2
EN
EQUIPMENT
MULTIFUNCTION OVEN CONTROL
Oven operation functions are steered
through turning of the rotary knob tem-
perature regulator 1 and rotary knob
mode of operation 2 on the control
panel 3.
The graphic symbols next to / on the
rotary knobs show the chosen opera-
tion modes.
To turn off the oven bring the rotary
knob temperature regulator 1 and the
rotary knob operating mode 2 to posi-
tion «0».
For more comfort you can use the dig-
ital clock timer 5. It enables you to run
the oven in an automatic, half auto-
matic or manual cycle.
Important! The activation of
the oven is signalized by the
flashing up of the red control-
ling light on the front panel.
Since your oven has reached the set
temperature, the red indication lamp
goes out. Also the backlight of the
push-pull knobs is turned off.
If a cooking recipe advices you to put
the meal in a preheated oven, o this
after the lapse of the red controlling
light.
The red controlling light can also glow
when the rotary handle is in the oven
inner illumination position, but in this
rotary handle position the heating ele-
ment is always off.
* for models with digital time switch
clock
Publicité
