Publicité
Quick Start Guide
How does the heater control work?
The control allows you to choose when you want heat and at what temperature. When using
a timer mode (see below)
maintaining the temperature displayed. The current time will be displayed when the heater is
outside of a timed heating period.
When
Manual,
the temperature shown on the home screen.
Set the Time
To set the date and time on the heater, press Menu, then press Up three times to highlight the
Date & time Icon, press Enter. Use the Down and Up to increase/decrease the hour, press
Enter to confi rm. Repeat this process to set the minutes, Day, Month and Year. Press Enter to
confi rm and return to home screen.
Set the Temperature
The temperature shown on the display is the target room temperature known as Setpoint.
This is the temperature that the heater will maintain during the heating periods. If the room
temperature is above this temperature then the heater will not operate. The heater leaves
the factory with this temperature set at 21
temperature. If you require a di erent room temperature then press either Down or Up until
the display shows the temperature you require
Your heater comes pre-programmed with four heating periods. These periods set the time
and temperature at which the heater operates in Comfort ON mode. These four periods are:
• P1: 07:00 – 09:00 21
• P2: 10:00 – 12:00 7
• P3: 13:00 – 15:00 7
• P4: 17:00 – 21:00 21
Child Lock
If you need to lock the controls so that the settings cannot be changed then activate the Child
Lock. To lock the controls press and hold both the Back button and Enter button together for
3 seconds. The
both the Back button and Enter for three seconds.
9
will display on the home screen to tell you when the heater is
Schedule or
Frost modes are being used the heater will always maintain
o
C
o
C
o
C
o
C
Lock icon will appear on the screen. To unlock repeat the action by pressing
DO NOT COVER
o
C which represents a typical comfortable room
Publicité
