Publicité
THE SCREEN DISPLAYS THE MESSAGE LO
In Body Temperature Mode, the thermometer will
display "Lo" if the measured object temperature is
lower than 32°C (89.6°F).
In Surface Temperature Mode,
the thermometer will display
"Lo" if the measured object
temperature is lower than 0°C
(32°F).
In Room Temperature Mode, the
thermometer will display "Lo" if
the measured ambient tempe-
rature is lower than 0°C (32°F).
This message displays for various reasons. Please
refer to the list of main issues below:
Reasons for
LO message display
Temperature reading
hampered by hair or
perspiration.
Temperature hampered by
an air draft or dramatic
change in ambient
temperature.
Temperature readings are
too close together, and
the thermometer did not
have time to reboot.
The measuring distance
is too far.
XII. SIGNS AND SYMBOLS
Symbol
Advice
Make sure there is no
obstruction or dampness
before taking temperature.
Make sure there is no air
blowing in the area of use,
which could affect the
infrared reading.
Pause for at least 3-5
seconds between readings;
a 15 seconds pause is
recommended.
Take measurements at the
recommended distance
(app. 3-5 cm) .
Description of symbol
Trade mark
Indicates the need for the user to
consult the instructions for use for
crucial cautionary information such
as warnings and precautions that
can not, for a variety of reasons, be
presented on the medical device
itself.
Application part, Type BF
Direct current
Degree of protection against harm-
ful ingress of water and particulate
matter 2 Protected and against solid
foreign objects of 12.5mm Φ and
greater 2 Protection against vertically
falling water drops when ENCLO-
SURE titled up to 15°
www.spengler.fr
33
Publicité
