CARE AND MAINTENANCE
• Please clean the thermometer regularly, usually
once a month.
• If the probe tip is damaged, please contact the
maintenance center.
• If necessary, you can clean it properly according
to the actual dirt of the product; if you do not use
this product for a long time (more than 2 months),
replace all the batteries take out.
• Store the thermometer in a dry location free from
dust and contamination and away from direct
sunlight.
• Do not use other batteries than mentioned
batteries, do not use rechargeable batteries, do
not throw in fire.
• Do not expose the thermometer to sunlight or
water.
• Do not use the thermometer rudely. Dropping,
crashing and severe shock will damage the
product.
Calibration:
This thermometer is calibrated at the time of
manufactured. If the thermometer is used
according to the instruction, periodic recalibration
is not required. If at any time you question the
accuracy of the measurement, please contact the
retailer immediately.
Don't attempt to modify or reassemble the
thermometer.
The calibration operation of this product must have
corresponding calibration equipment, otherwise it
cannot calibrate by itself.
XI. TROUBLESHOOTING
If you have any problem while using your thermo-
meter, please refer to this guide to help resolve the
problem. If the problem cannot be resolved, please
contact our customer service.
THE SCREEN DISPLAYS THE MESSAGE HI
In Body Temperature Mode, the thermometer will
display "HI" if the measured object temperature is
higher than 43°C (109.4°F).
In Surface Temperature Mode,
the thermometer will display "HI"
if the measured object tempera-
ture is higher than 60°C (140°F).
In Room Temperature Mode, the
thermometer will display "HI" if
the measured ambient tempera-
ture is higher than 40°C (104°F).
32
www.spengler.fr