Remote Controller Operation - Laserworld Garden Star Série Mode D'emploi

English
Manual: Laserworld Garden Star Series
GARDEN STAR PRO White Star I GS-400RGB-W

6. Remote controller operation

OPERATING THE LASER PROJECTOR
Once the laser light effect is turned on, it will enter the default mode with the laser on and the auto-
matic timer in 6 hours on and 18 hours off mode. Use the included remote control to change these
settings.
OPERATING THE TIMER
This laser light effect has a built-in timer that is designed to automatically shut off after 6 hours of
operation. It will go into sleep mode for 18 hours and resume its operation thereafter. The timer will
turn on once the light is plugged in. The timer can be changed to 4 hours on/20 hours off and 8 hours
on/16 hours off.
OPERATING THE REMOTE CONTROL
Use the included infrared remote control to operate the laser light effect features. Infrared signal does
not go through solid objects, such as windows, walls, trees, shrubs, etc. Make sure there is a clear line of
sight between you and the fixture. Point the remote control at the FACE of the laser light effect fixture,
where the receiver is located. The remote operates up to 20' (6.1 m) of unobstructed distance away
from the face of the fixture.
20´ (6,1)
ON/OFF: Turns the device on & off. When turning the laser light effect off, the device will save all current
settings so that the device will resume with the latest mode when turning it on again.
COLOR: Push the color button and seven different colors cycle through (Green, Red, Blue, Yellow, Pink,
White, Thiel) Available modes: STATlC MOTION, CHASING, PULSE, FADE, FLASH.
BRIGHTNESS+: lncreases the brightness of the laser light. Pushing the button persuades the maximum
brightness. Available modes: STATIC MOTION, CHASING, PULSE, FADE.