Preliminary Warning Notices; Initial Operations, Safety Instructions - Laserworld Garden Star Série Mode D'emploi

Manual: Laserworld Garden Star Series
GARDEN STAR PRO White Star I GS-400RGB-W

2. Preliminary warning notices

1.
Please use this device only according to these operating instructions.
2.
Do not use the device if there are any visible damages on housing, power adapter or power
cords.
3.
Never look directly into the light source of a laser projector.
4. This device is manufactured according to protection class IP65. It is dust-proof and protected
against temporary submergence. Do not operate the device under water.

3. Initial operations, safety instructions

1.
Make sure to use correct voltage; see infor-
mation in this manual.
2.
Make sure that the device is not connected
to mains during installation.
3.
Installation has to be done according to sa-
fety regulations of the respective country.
4.
If the device has been exposed to great
temperature changes, do not switch it on
immediately. Condensation may damage
device.
5.
Never use dimmer, RC or other electroni-
cally switched sockets.
6.
Ensure sufficient ventilation and do not
place the device on any warm or heat radi-
English
ating surface. Ensure that the device does
not get overheated.
7.
Operating temperatures: -20° C to +40° C.
8.
The operation of the device below -15°C
may result in reduced output power and
below that temperature laser output may
stop. This is not a deficiency, but derives
from general physical principles. When the
temperatures rise above the given tempe-
ratures the laser runs at normal level again.
9.
This unit is intended for indoor and outdoor
use.
10.
Do not open the device! This product has
no user serviceable parts inside. Danger
of laser radiation!