Remote Controller Operation - Laserworld Garden Star Série Mode D'emploi

Manual: Laserworld GS-80RG LED

6. Remote controller operation

LED ON/OFF
LASER ON/OFF
LASER FLASH
LASER ROTATION
LED COLOR
LASER ON / OFF & LED ON / OFF:
Every remote control that is delivered with the Laserworld Garden Star GS-80RG LED has two „ON/OFF"
buttons (red for laser, blue for LED) on the left corner, to switch both the Laser and the LED on and off.
Push power and the laser respectively the LED output starts. When pushing the „On / OFF" button again,
output stops. Even if the laser and LED both have been switched off by the remote control, it is recom-
mended to remove the power supply plug from the socket when the device is not in use.
TIMER:
The Laserworld Garden Star GS-80RG LED offers a timer function. With the timer feature a power off time
for your Garden Star unit can be set.
After 1, 2, 3, 4, 5 or 6 hours the Garden Star unit powers off automatically, if the respective button has
been pushed. If a certain time period is selected, output will automatically start at the same time on the
next day for the same selected time period.
For setting a power off timer press one of the six timer buttons on the bottom of the remote control. The
laser projection blinks. If the setting has been made press the timer button a secont time to delete the
previously selection.
English
LASER COLOR
AUTOMATIC COLOR LED & LASER
LED FLASH
TIMER