3M Emphaze BV0 3R Instructions D'installation Et D'utilisation page 18

To reduce the risk of product loss associated with a) chemical release from
purifi cation media, and b) nullifi cation of Supplier's USP<88> Class VI compliance of
fi lter capsule components:
After pre-use NaOH sanitization, fl ush the system with appropriate aqueous buff er
until the pH range 5-9 has attained and monitor the pH of the capsule effl uent to
determine when the baseline has been reach (e.g., ± 0.5 pH units from the pH of the
buff er used to fl ush the media).
4.B. Required Preconditioning Flush Procedure for the Pre-use NaOH
Sanitized BV0.3R and BV1R Capsules
Perform Required Preconditioning Flush procedure as described in Section 2.A.
IMPORTANT NOTICE: Monitor the pH of the capsule effl uent to determine when the
baseline has been reach (e.g., ± 0.5 pH units from the pH of the buff er used to fl ush
the media).
IMPORTANT NOTICE: Do not blow down with a gas the 3M™ Emphaze™ AEX Hybrid
Purifi er capsules after preconditioning fl ush procedure.
Capsule is ready for immediate use.
IMPORTANT NOTICE: Do not blow down 3M Emphaze AEX Hybrid Purifi er capsules after
pre-conditioning fl ush procedure.
4.C. Single-stage Purifi cation
Perform Single-stage Purifi cation as described in Section 2.B.
WARNING
- 16 -