3M Emphaze BV0 3R Instructions D'installation Et D'utilisation page 16

To reduce the risk of burn or exposure injuries associated with autoclave sterilization:
• Wear personal protective equipment (PPE) to handle hot capsules.
3.B. Required Preconditioning Flush Procedure for the Pre-use Autoclaved
Capsules
To reduce the risk of injury from possible end user exposure associated with a)
biological contamination and b) degradation products released from the purifi cation
media; and
To reduce the risk of product loss associated with a) chemical release from
purifi cation media, and b) nullifi cation of Supplier's USP<88> Class VI compliance of
fi lter capsule components:
Do not use with or expose this product to process liquids until capsule temperature
goes <40°C (104°F) for no longer than 30 mins.
3B.1. Required Preconditioning Flush Procedure
Perform Required Preconditioning Flush procedure as described in Section 2.A.
IMPORTANT NOTICE: Do not blow down 3M™ Emphaze™ AEX Hybrid Purifi er capsules
after pre-conditioning fl ush procedure.
3.C. Single-stage Purifi cation
Perform Single-stage Purifi cation as described in Section 2.B.
CAUTION
WARNING
- 14 -