Publicité
2.2
Intended use
2.3
Qualification of personnel
3
Product description
3.1
Product identification via the SICK product ID
3.2
Operating and status indicators
8025471.1NSI/2024-05-24 | SICK
Subject to change without notice
The GTE6L is an opto-electronic photoelectric proximity sensor (referred to as "sensor"
in the following) for the optical, non-contact detection of objects. If the product is used
for any other purpose or modified in any way, any warranty claim against SICK AG shall
become void.
Any work on the product may only be carried out by personnel qualified and authorized
to do so.
Qualified personnel are able to perform tasks assigned to them and can independently
recognize and avoid any potential hazards. This requires, for example:
•
technical training
•
experience
•
knowledge of the applicable regulations and standards
SICK product ID
The SICK product ID uniquely identifies the product. It also serves as the address of the
web page with information on the product.
The SICK product ID comprises the host name pid.sick.com, the part number (P/N),
and the serial number (S/N), each separated by a forward slash.
For many products, the SICK product ID is displayed as text and QR code on the type
label and/or on the packaging.
Figure 2: SICK product ID
Energetic photoelectric proximity sensor.
GTE6L-xxx1x
3
2
3
1
OPERATING INSTRUCTION
2
4
O P E R A T I N G I N S T R U C T I O N | GTE6L
en
7
Publicité
