General Characteristics - Cembre HT131LN-C Notice D'utilisation Et Entretien

ENGLISH

1. GENERAL CHARACTERISTICS

– Head: "C" shaped with large jaw opening, see Fig. 1 (*).
– Application range: suitable for installing electric compression connectors (lugs and splices) on
conductors up to .............................................................................................................400 mm
– Crimping force: ................................................................................................................130 kN
– Rated operating pressure: ..........................................................................................700 bar
– Dimensions: length ........................................................................................................538 mm (21.18 in.)
width (with handles closed)..............................................................144 mm (5.67 in.)
width (with handles open) ................................................................344 mm (13.54 in.)
– Weight: ................................................................................................................................7 kg
– Recommended oil: .............................. ........................ENI ARNICA ISO 22
– Operating positions. The three operating positions are identifi ed on the main handle (200), which
rotates relative to the reference symbol
– Advancing speed. The tool has a twin speed operation and automatically switches from a rapid
advancing speed of the ram to a slower, more powerful crimping speed.
– Safety. The tool is provided with a max pressure valve; MPC1 special manometer is available as
an optional accessory to check the proper setting of the valve.
HYDRAULIC CRIMPING TOOL
HT131LN-C
on the body (13) (see Fig. 1).
Rest position (Handles locked): lock handles together by means of
the handle latch (49) when tool is not in use.
Release position: close the moveable handle (203) against the fi xed
handle (200), in order to discharge the oil pressure and retract the
dies.
Operating position: On releasing the moveable handle (203), the
fi xed handle (200) rotates automatically to this position.
Operate the moveable handle (203) to build up pressure and close
the dies.
ESSO INVAROL EP22
2
(750 MCM)
(14.6 sh ton)
(10,000 psi)
(15.4 lbs)
or
or equivalent
4