Description Of The Equipment; Technical Data; Dimensions And Weight - Beretta CONNECT AT/BT Manuel D'instruction

DESCRIPTION OF THE EQUIPMENT

The Connect AT/BT is a water separator that is only to be used with
condensing boilers (type 2005), where it separates the water in
the generator and in the plant, when the latter is characterised by
high flow rates that exceed those developed by the generator
itself. It can also be used to manage mixed low and high tempera-
ture heating systems (radiators / fan coils and radiant panels).
It allow to manage a climatic curve for the high temperature system
and a second for the low temperature system
5

TECHNICAL DATA

Electrical power supply
Maximum power absorbed by the
Time (opening / closing) for the mix valve
Working range of the sensor
Working temperature
Electrical protection level

DIMENSIONS AND WEIGHT

DESCRIPTION
L
P
H
NET WEIGHT
5
Connect AT/BT
(SM)
440 mm
155 mm
616 mm
19 Kg
The Connect AT/BT unit can be built into the wall, thereby avoiding
any protrusion, or it can be wall-mounted.
The unit comes complete with the wiring necessary for connecting
it to the boiler for typical Connect AT/BT installations, near to the
boiler itself (cable length 2 m).
6
1 Automatic high limit thermostat low temperature
system
7
2
High temperature system thermometer
8
3 Low temperature system pump
4
High temperature system pump
5 Manual high limit thermostat low temperature
system
6 Pass cables
9
7 Fixing slots
8
Mixing bottle
9
Mixing valve
10 Electrical connection board
10
11
Low temperature system thermometer
11
12
Low temperature system NTC sensor
12
230(±10%)-50
230
120
0 ÷ +90
0 ÷ +50
IP10D
35
V-Hz
W
s
°C
°C