Ordinary Dual Code Mode Function; Activation Of Ordinary Dual Code Mode By Primary Code Holder; Opening With Dual Code By Dual Code Holder; Enter Valid 6-Digit Primary Code 1 X - Kaba Mauer 82132 Code-Combi B Mode D'emploi

GB

4.3 Ordinary dual code mode function

4.3.1 Activation of ordinary dual code mode by primary code holder

This action deletes the primary code and replaces it with a dual code. The lock can only be
opened by a combination of the 1
1) Open lock with valid 6-digit primary code (see 4.1.1)
2) Press ON
3) Press P
4) Enter valid 6-digit primary code again
5) Press P
6) Press 7
7) Enter new 6-digit 1
8) Enter new 6-digit 1
9) Enter new 6-digit 2
10) Enter new 6-digit 2
11) Test newly programmed dual code by locking and opening once more
If the new partial combinations are not correctly confi rmed, the signal 3 x
Repeat the sequence.
The correct sequence of the partial combinations and its repeated confi rmation must be
adhered to.

4.3.2 Opening with dual code by dual code holder

1) Press ON
2) Enter 6-digit 1
3) Enter 6-digit 2
4) Within 4 seconds turn bar handle clockwise until stop position reached
The correct sequence of the partial codes must be adhered to. In order to open the lock the
1 st part of the combination has to be entered followed by the 2
Page 30
st and 2
st
part of combination
st
part of combination again
nd
part of combination
nd
part of combination again
st part of combination
nd
part of combination
82132 Code-Combi B
dual code
nd part of the code (mutual check principle).
1 x
1 x
appears.
1 x
1 x
nd part of the combination.
Kaba Mauer GmbH
/ 2 x
/ 2 x