Locking; Delegated Dual Code Mode Function; Switching On/Alteration Of Dual Code By Primary Code Holder - Kaba Mauer 82132 Code-Combi B Mode D'emploi

By pressing the key combination P and 0 all the functions programmed (secondary code,
dual code, time delay, opening window) are deleted.

4.1.7 Locking

In conjunction with a bolt work: after the door has been closed the bolt work must be locked
and the lock closed.
1) Turn bar handle counter clockwise until stop position reached

4.2 Delegated dual code mode function

4.2.1 Switching on/alteration of dual code by primary code holder

1) Open lock with valid 6-digit primary code (see 4.1.1)
2) Press ON
3) Press P
4) Enter valid 6-digit primary code
5) Press P
6) Press 5
7) Enter new 6-digit 1
8) Enter new 6-digit 1
9) Enter new 6-digit 2
10) Enter new 6-digit 2
11) Test newly programmed dual code by locking and opening once more
If the new partial combinations are not correctly confi rmed, the signal 3 x
Repeat the sequence.
The correct sequence of the partial combinations and its repeated confi rmation must be
adhered to.
Kaba Mauer GmbH
primary code
st
part of combination
st
part of combination again
nd
part of combination
nd
part of combination again
82132 Code-Combi B
dual code
GB
/ 2 x
1 x
/ 2 x
1 x
appears.
Page 27