Troubleshooting - Petsafe Drinkwell SEDONA-PG-CA-17 Manuel D'utilisation

.
• Your pet may prefer that the Pet Fountain be placed away from their normal
feeding area.
• Add ice cubes to the Bowl for refreshing, ice-cold running water.

Troubleshooting

The answers to these questions should help you solve most problems you may have with
the Pet Fountain. If they do not, please contact our Customer Care Centre.
PROBLEM
Pump is not working or
the water is not flowing as
much as it used to.
Pet Fountain is loud.
There are black particles in
the Bowl.
14
TROUBLESHOOTING
SOLUTION
• Never let the water in the Bowl get below the
minimum fill level. This can cause the Pump to
overheat and stop functioning.
• When refilling the Bowl, make sure to add water
before turning the fountain on.
• Lack of regular cleaning may result in the Pump
becoming clogged with pet hair and food debris.
The Pump must be cleaned every 2-4 weeks to
ensure proper function.
• A video detailing how to properly clean the Pump is
available on our website at www.petsafe.net.
• Fill the Pet Fountain with water up to the max fill line.
• A low humming noise is normal, but it should not be
loud. Check the water level. If water level is too low
then the Pump will have to work harder causing it to
be louder than normal.
• Unplug the Pet Fountain for 15 seconds. If the noise
does not stop when plugged back in, it's possible
that some debris is caught on the Impeller. Remove
the Pump and clean the Impeller. Try rubbing a small
amount of vegetable oil onto the magnetic pin with a
cotton swab to lubricate the Impeller.
• This is loose granulated carbon dust from the filter
and is completely harmless for your pet to drink.
Rinse the filter in cold water before placing it in the
Pet Fountain to prevent this.
www.petsafe.net