Publicité
2
Features and Functions
You may press
shown on the primary display.
Figure 2-16
Press
activity is detected after 3 seconds, the comparison will also begin.)
The LCR meter beeps three times and displays
reading is greater (
If the reading is within the high and low limits, the meter beeps once and displays
Figure 2-17
The limit set used in the comparison is displayed after the
Press and hold
60
or
DQO
Range
Limit
High and low limit values
while the
Hold
Rec
) than the high limit or lesser (
in the secondary display.
nGo and Go indications
for more than 1 second to exit this mode.
DQO
Limit
again to toggle between the high (H) or low (L) values
Auto
annunciator is flashing to start the comparison. (If no
Keysight U1731C/U1732C/U1733C User's Guide
in the secondary display if the
) than the low limit.
/
indication.
Publicité
