Publicité
Preparing Your LCR Meter
Check the shipment
When you receive your LCR meter, check the shipment according to the following
procedure.
1 Inspect the shipping container for damage. Signs of damage may include a
2 Carefully remove the contents from the shipping container, and verify that the
3 For any question or problems, refer to the Keysight contact numbers on the
Install the battery
Your LCR meter is powered by a single 9 V alkaline battery (included with the
shipment). When you receive your LCR meter, the 9 V alkaline battery is not
installed.
Use the following procedure to install the battery.
Before you proceed with the battery installation, remove all cable
CAUTION
connections to the terminals and ensure that the LCR meter is turned OFF.
Use only the battery type specified in
page 89.
Keysight U1731C/U1732C/U1733C User's Guide
dented or torn shipping container or cushioning material that indicates signs
of unusual stress or compacting. Save the packaging material in case the LCR
meter needs to be returned.
standard accessories and your ordered options are included in the shipment
according to the standard shipped items list found in the U1731C/U1732C/
U1733C Quick Start Guide.
back of this manual.
"Characteristics and Specifications"
Introduction
1
on
19
Publicité
