Publicité
Measuring resistance (R)
Set up your LCR meter to measure resistance as shown in
To avoid possible damage to your LCR meter or to the equipment under test,
CAUTION
disconnect the circuit power and discharge all high-voltage capacitors
before measuring resistance.
1 Press
2 Press
Figure 2-6
3 Insert a resistor into the component socket or connect the test clip to the
4 Read the display.
Keysight U1731C/U1732C/U1733C User's Guide
to power on the LCR meter.
to select a suitable test frequency, and
Freq.
a press
to enable the auto identification function; or
b alternatively press
Resistance measurement
component leads as required.
to select resistance measurement.
ZLCR
P
S
Features and Functions
Figure
2-7.
2
49
Publicité
