Publicité
Measuring inductance (L)
Set up your LCR meter to measure inductance as shown in
It is recommended that you perform the Open/Short calibration (see
NOTE
before testing to achieve optimum precision for all inductance, capacitance, and
resistance measurements at either the highest or lowest ranges.
1 Press
2 Press
Figure 2-2
3 Insert an inductor into the component socket or connect the test clip to the
4 Press
5 Read the displays.
Keysight U1731C/U1732C/U1733C User's Guide
to power on the LCR meter.
to select a suitable test frequency, and
Freq.
a press
to enable the auto identification function; or
b alternatively press
Inductance measurement with Q factor
component leads as required.
to change the secondary display measurement (D, Q, or θ).
DQO
Limit
to select inductance measurement.
ZLCR
P
S
Features and Functions
Figure
2-3.
page
2
62)
45
Publicité
