Jaga LINEA PLUS HYBRID ACO Manuel D'installation Et D'utilisation page 42

2.2. OPERATION
The unit automatically switches to the heating mode as soon as the water temperature is higher than 28°C and 4°C higher
than the room temperature. The unit will start at the speed last selected(1,2 or 3). When one of the two conditions is no
Only in combination with a suitable heat
pump and control valve for heating and
longer met, the unit automatically returns to standby.
cooling
The unit automatically switches to the cooling mode as soon as the water temperature is lower than 24°C and 2°C lower
than the room temperature. The unit will start at the speed last selected" (1,2 or 3). When one of the two conditions is no
longer met, the unit automatically returns to standby.
Make sure that the thermostatic head is set to cooling mode when cooling.
The breeze mode is manually switched on or off, regardless of water temperature. As long as the
breeze mode is active, the auto-changeover is deactivated .
Tw > 28C
Optional:
MODE
A manual thermostatic radiator valve will open when heating or cooling are required.
Tw < 24ºC
A smart thermostatic radiator valve will open when heating or cooling are required.
MODE
Tw < 24ºC
Tset < Tk
3. CONTROL
MODE
Snelheid 1
– Switch on the device: Hold down [Mode] for 10 seconds until all LEDs are on.
MODE
10 sec
– Mode: The device is controlled via auto-change-over. The user can temporarily select another mode manually.
MODE
10 sec
MODE
MODE
Tw < 24ºC
Tw < 24ºC
MODE
Tw < 24ºC
– Speed:
MODE
Tset < Tk
Tw < 24ºC
MODE
Snelheid 1
MODE
Snelheid 1
MODE
10 sec
MODE
10 sec
42
MODE
10 sec
Tw < 24C Tw= /
MODE
MODE
Tw > 28ºC
Tset > Tk
MODE
Snelheid 2
MODE
MODE
MODE
MODE
MODE
Tw > 28ºC
MODE
Tset > Tk
Tw > 28ºC
MODE
Snelheid 2
MODE
Snelheid 2
MODE
MODE
JAGA N.V. | LLINEA PLUS HYBRID - ACO/B | MANUEL | 2024.09.12 | V.1.02
MODE
MODE
Tw > 28ºC
MODE
O
MODE
Snelheid 3
MODE
MODE
MODE
MODE Tw > 28ºC
Tw > 28ºC
MODE
MODE
MODE
Snelheid 3
MODE
Snelheid 3
MODE
MODE
MODE
MODE
O
MODE
MODE
MODE
MODE
MODE
MODE
MODE