Publicité
NOTE
If there is dirt on or underneath the sealing
ring 8, it can be removed for cleaning:
–
Pull the sealing ring 8 downwards off the
lid 9 .
–
Clean the sealing ring 8 in warm water
with a little washing-up liquid . Rinse off all
detergent residues and dry the sealing ring 8
thoroughly .
–
Remove any dirt from the recess on the lid 9
with a damp cloth . If necessary, apply a mild
washing-up liquid to the cloth . Afterwards,
wipe with a cloth moistened only with fresh
water and dry everything thoroughly .
–
Push the sealing ring 8 back onto the lid 9
so that the sealing ring 8 slides into the
recess . Make sure that the small notch on the
sealing ring 8 is wrapped around the fixing
lug on the cover 9 (Fig . 1) . The flattened
side of the sealing ring 8 should lie on the
same side as the sensor 7:
Fig . 1
12) Wipe the mains cable with a damp cloth .
13) Dry all parts well before re-use .
Storage
■
Store the cleaned appliance in a clean, dust-free
and dry location .
GB │ IE
│
11
■
Publicité
