Télécharger Imprimer la page

SilverCrest 460085 2401 Mode D'emploi page 12

Publicité

Blending
If you want to blend soups or shakes for a short
time, you can the MIXER function
1) Add the food to be blended into the blender
jug 5 if it is not already in there . Ensure that
the blender jug 5 is filled to at least the MIN -
1300 ml marking, but not higher than the MAX
- 1600 ml marking .
2) Place the lid 9 on the blender jug 5 . Ensure
that the contact plug 1 in the lid 9 fits cor-
rectly into the safety socket 2 .
3) Insert the connector 3 into the built-in plug 4
on the appliance .
4) Insert the plug into a mains power socket . You
will hear a beep and the programme indicators
will flash .
5) Press the MODE button q repeatedly until the
MIXER programme indicator
flash .
6) Press and hold the START/STOP button i
for as long as the contents of the blender jug
5 is to be blended, but not longer than 20
seconds . As soon as you let go of the START/
STOP button i, the blending process stops .
The blending process stops automatically after
20 seconds .
Safety appliances
Overheating protection
z .
This appliance is fitted with overheating protection
to protect the motor from overheating .
If the overheating protection is triggered, the motor
stops and the appliance switches itself off . It cannot
be switched back on until it has cooled down .
This can happen if:
If the overheating protection is triggered and the
appliance stops, pull the plug out of the socket
and wait around 5 minute until the appliance
z starts to
stops . After it has cooled down, you can use the
appliance again .
Overfilling and overflow sensor
This appliance is fitted with a sensor 7 that recog-
nises when the apparatus is overfilled or threatens
to overflow .
If the appliance is overfilled, the appliance will not
start and you will hear a beep . In this case, reduce
the amount of liquid . Always pay attention to the
MAX - 1600 ml and MIN - 1300 ml markings on
the blender jug 5!
If the appliance threatens to overflow during a
cooking or blending process, the appliance will
switch off and starts to beep . Reduce the amount
of liquid and restart the appliance .
You have used the MIXER function
several times in quick succession for a total
of more than 20 seconds .
Several cooking processes have been start-
ed in direct succession without allowing the
appliance to cool down .
z
GB │ IE
 9

Publicité

loading

Ce manuel est également adapté pour:

Cook 'n' mix smk 1000 b3