Lifting Of The Machine; Positioning Of The Machine; Bench Machine Positioning - OEM PRESSFORM 350 Mode D'emploi Et D'entretien

PIZZAFORM
Installation and connections
Chapter 3
FIG. 1
DANGER
All operations described in this c hapter shall be
carried out by skilled technicians.
3.1 - LIFTING OF THE MACHINE (Fig. 1)
1
The machine shall be lifted by using a crane or a hoist,
by inserting a rope hook in the eyebolt (1).
DANGER
Do not stay within the crane or hoist range or under
the uplifted machine.
3.2 - POSITIONING OF THE MACHINE (Fig. 2)
FIG. 2
3.2.a - BENCH MACHINE POSITIONING
DANGER
600 mm
Make sure that the carrying plane is suitab le to
support the c harges as mentioned in the c hapter
"TECHNICAL SPECIFICATIONS".
The machine shall be positioned according to the
instructions repor ted in Fig 2, since the y indicate the
400 mm 400 mm
minimum safety range to be considered in order to allo w
the user or the technician to properly carr y out any work
and/or maintenance operations.
1000 mm
GB - 10