Hach POLYMETRON 8811 Manuel D'utilisation De Base page 19

XXXXX Measurement unit.
ready The instrument is ready for the programming. All the valves are closed.
START menu
MAIN-MENU
START
Press ENTER.
XXXXX CH XX Measurement unit. The instrument displays the analyzer status: the analyzer is in measuring
mode.
titration (Y)
X: number of channel
Y: number of the channel in use
Z: number of measurement
Programming menu
DISPLAY
MAIN-MENU
PROGRAMMING/ READING
The submenus can be invoked using the SCROLL UP/DOWN keys, the ENTER key selects a
submenu and the SELECT key returns to the main menu.
In reading mode, the programming parameters can not be changed.
PROGRAMMING/READING sub-menus
N. OF CHANNELS menu
DISPLAY
PROGRAMMING
N. OF CHANNELS
Press ENTER.
N. OF CHANNELS
X CHANNELS
The number of the channel can be chosen with the SCROLL UP/DOWN keys.
Press ENTER.
Launch a new measurement cycle.
DESCRIPTION
Pressing ENTER for approximately 3 seconds accesses the
programming submenus
DESCRIPTION
Adjust the number of channels
X is the number of the channel selected (1 to 6)
SUB-MENUS
N. OF CHANNELS
SEQUENCE
TIMING
ANALOG-OUT
ALARM
UNIT
SERVICE
PM XXXX
English 19